Beer Keg Pump Kit, G5/8 Keg Coupler Beer Keg Pressurized Pump Kit With Dispenser Beer Faucet Draft Beer Accessories For Bars, Pubs, Restaurants, Hotels Or Homes

Specification:
Item Type: Beer Keg Pump Kit

Material: Brass+Stainless Steel

Thread: G5/8

Weight: Approx. 2601g / 91.7oz

How to Use:
1. Use a small bucket (not included).

2. Turn on the faucet until all pressure is released.

3. Turn on the faucet and start pumping until the required flow rate is reached.

4. Stop pumping, turn on the pump only by pumping the faucet, and pump only to maintain a good beer flow.

5. Repeat step 3 until the keg is empty.

Package List:
1 x Beer Keg Pump

1 x Beer Dispenser

1 x Beer Tap

1 x Tap Handle

6 x Accessory

Note:
1. Each keg Tap ‑ 8in pump has pressure tested, the hose clip on the pipe is assembled by us instead of being used by others. When changing hose clamps make sure they are clamped and not deflated.

2. It is necessary to have lubricating oil in the air pump. Make sure it is food grade lubricating oil. Of course you can put on your own oil.

3. The pump body is cylindrical. It is recommended to clean and put away after each use. Avoid knock against. The hollows of cylindrical wall will make the pumping less pleasant.

4. After used per time, be sure to clean your party pump with chemicals specifically manufactured for beer line cleaning. The simple process takes only a few minutes and will assure trouble free operation when the party pump will next be used.

• The 8‑inch pump injects more air with each pump to pressurize the barrel faster.
• Easy to disassemble and clean, widely used in bars, pubs, restaurants, hotels or homes.
• Suitable for G5/8 keg coupler (with S‑type coupler), which is convenient for beer distribution.
• Easy installation, will not affect or reduce the taste of beer, is a practical draft beer accessory.